* daemon-go: port layered list caching and matching strategies
* daemon-go: use immutable rule/list snapshots and add load benchmarks
* daemon-go: dropped gobwas, rule/list now use go filepath.Match for globbing
Restrict the use of network type to network operand:
"operator": {
"type": "network",
"operand": "dest.network",
"sensitive": false,
"data": "LAN",
"list": []
}
Allow to create rules to mach a range of source or destination ports.
"operator": {
"operand": "dest.port",
"data": "30000-65500",
"type": "range",
"list": [],
"sensitive": false
},
see: #960, #1516
lock just the operation, without using defer. In this case is not
needed.
The difference is minimal:
BenchmarkDefer-4 100000000 50.94 ns/op
BenchmarkNoDefer-4 131769184 45.35 ns/op
Originally we had one single function to check connection properties
against rules, which accepted only strings.
As we've added new functionality, this single function has been made
generic, to accept any type of data. From a code readability point of
view, it has worked well, but at the cost of a slight performance
penalty.
Now in order to gain a little bit of performance by avoiding types
conversion, we'll use 2 callbacks:
- a generic callback that accepts data of any type.
- and a simple one that accepts strings.
Some use cases:
- Reject connections initiated by certain paths:
Deny all connections initiated by cron*:
/usr/sbin/cron
/usr/bin/curl
"action": "reject",
"operator: {
"type": "list",
"operand": "list",
"data": "",
"list": [
{
"type": "regexp",
"operand": "process.parent.path",
// /usr/bin/crond , /usr/bin/crontab, ...
"data": "^/usr/(s|)bin/cron"
}
]
}
- Reject or Allow connections of binaries launched by another app:
"action": "allow",
"operator": {
"type": "list",
"operand": "list",
"data": "",
"list": [
{
"type": "simple",
"operand": "process.parent.path",
"data": "/opt/spotify/bin/spotify"
},
{
"type": "simple",
"operand": "process.path",
"data": "/usr/bin/wget"
}
]
}
You can also combine multiple parent paths, to allow a command launched
from a specific chain of processes:
/usr/lib/systemd/systemd
/usr/sbin/cron
/bin/sh
/usr/bin/curl
The order is checked from the newest process to the oldest (curl -> sh
-> cron -> systemd)
The operand can be used with any of the existing types (simple, regexp,
etc).
Related: #406
Now you can create rules to filter processes by checksum. Only md5 is
available at the moment.
There's a global configuration option that you can use to enable or
disable this feature, from the config file or from the Preferences
dialog.
As part of this feature there have been more changes:
- New proc monitor method (PROCESS CONNECTOR) that listens for
exec/exit events from the kernel.
This feature depends on CONFIG_PROC_EVENTS kernel option.
- Only one cache of active processes for ebpf and proc monitor
methods.
More info and details: #413.
- Allow to filter connections by source IP/Network.
(it also may be useful filter by source port)
- Removed AlwaysOnTop Hint from rules editor dialog.
Closes#922
Rules of type lists [domains, IPs, network ranges] are reloaded
whenever a file containing the data changes.
One could expect to update these files once or twice a day, but
by updating the files continuously it was possible to cause a leak,
leading to a crash.
- Added lists of IPs and network ranges. One per line. Blank lines or
lines that start with # are ignored.
- Added lists of domains with regular expressions. One per line.
Blank lines or lines that start with # are ignored.
Until now you could use regular expressions with the fields
"To this host" or "To this IP", to match multiple domains or IPs.
But if you wanted to use more than 2-3 domains or IPs it was not really
user friendly.
Hopefully we'll be a little more versatile to cover use cases like #461
and #485.
- Delete lists of domains if the rule about to change is of type Lists.
- Monitor the lists of domains, and reload them if they're modified.
- Delete rules from disk when the Duration changes from
Always (saved on disk) to !Always (temporary).
- After the above operation a fsnotify Remove event is fired. Don't
delete the rule from memory if it's temporary.
- Rules are only compiled if they're enabled, avoiding unnecessary
allocations.
There're some situations where we need to delete loaded lists:
- When an enabled rule of type Lists is disabled (after changed on
disk, or when configured from the GUI).
- When an enabled rule of type List with an Operator of type Lists is
disabled.
Initial support to filter connections using lists of domains.
The lists must be in hosts format:
- 0.0.0.0 www.domain.com
- 127.0.0.1 www.domain.com
From the rules editor, create a new rule, and select
[x] To this lists of domains
Select a directory with files in hosts format, select [x] Priority rule,
select [x] Deny and click on Apply.
An example of a list in hosts format:
https://www.github.developerdan.com/hosts/lists/ads-and-tracking-extended.txt
Note: you can also add a list of domains to allow, not only domains to
block.
TODOs:
- support for URLs besides directories (local lists).
- support for scheduled updates of the above URLs.
related #298
Every rule has an entry point besides a constructor, which configures
all it needs to match connections, based on user defined criteria (ip,
regexp, etc).
This only needs to be done the first time we load a rule, because the
fields of a rule are static. However for rules of type "lists" we were
iniatializing each rule of this type once per connection that it
matched.
- ui, ruleseditor: added missing operator when using a regular
expression on the DstIP/Net field.
- daemon, rules: ensure that regular expressions are of type string
before evaluating them.
reported here: #333
Now you can filter by destination network, for example:
- 127.0.0.1/8
- 192.168.1.0/24
This will ease to solve the request #89 .
Some common network ranges have also been added so you can select them
from a combo box. More info #73.
Added process.id operator operand for future use, in order to filter by
PID.
If a rule has the priority flag set, no others rules will be checked.
So if you name the rule as 000-allow-xx and set the priority flag, the
rule wil lbe the only one that will be checked if it matches a
connection.
See #36 to know more on this feature.
Destination host, process path and process arguments are now case
insensitive by default.
There's a new rule operator field (sensitive), to change this behaviour:
```
{
"type": "simple",
"operand": "dest.host",
"sensitive": false,
"data": "opensnitch.io",
"list": null
}
```
Rules without this field will evaluate as false by default.
closes#45
If for some reason a Regex type rule can not be parsed, opensnitchd
panics and exit. We drop regex.MustCompile() in favor of
regex.Compile(), and in case of failure we just drop the packet.
In either case, the daemon should not panic but it should not received
an invalid rule either, specially from the UI.
Closes#4